1693 RLC Digibridge
3.2.9 7000-04 Alligator Clip Leads
To connect to DUT's that are multi-terminal, physi-
cally large, or otherwise unsuited for remote test
fixtures, connect bnc-to-banana-plug adaptors to
the Digibridge. This is particularly convenient for
DUT's with binding posts, when the alligator clips
are removed.
Figure 3-15: 7000-04 Alligator Clip Leads
To use this cable, connect 7000-04 cable to the 1693
Digibridge as specified in Table 3-3.
Bias
On 1693
Description
Polarity
IL
+
PL
+
PH
-
IH
-
Table 3-3: Digibridge to 7000-04 cable
connections
Connect the alligator clips if desired, and zero the
Digibridge as instructed in Section 3.1.3 on page 14.
24
7000-04 Cable
Drive -
IL (black)
Potential -
PL (black)
Potential +
PH (red)
Drive +
IH (red)
When connecting alligator clips to wire or other de-
vices use the following connection to minimize errors.
Figure 3-16: Connecting alligator clips
It is important that sense terminals be closest to the
DUT and not to intermix high and low connections.
Operation