IET Labs, Inc. RLC Digibridge 1693 User And Service Manual page 109

Parameter:
Value
NONe No data output
BIN Bin #
QDR QDR
QBIN QDR, Bin #
RLC RLC
RBIN RLC, Bin #
RQDR RLC, QDR
RQBin RLC, QDR, Bin #
RQBFail RLC, QDR, Bin # on FAIL only
RQBPass Same on FAIL; Bin # on PASS
Equivalent legacy command:
X0, X1, X2, X3, X4, X5, X6, X7, X8, X9
Equivalent key:
none
:CONFigure:DATaformat
Syntax:
:CONFigure:DATaformat {ASCii|BINary}
Description:
Selects the GPIB / RS-232 output data transfer
format.
Parameter:
Value
ASCii Set output format to normal ASCII text
BINary Set output format to compacted binary
Equivalent legacy command:
x0, x1
Equivalent key:
none
:SYSTem:KEYPad
Syntax:
:SYSTem:KEYPad {ENABle|DISable}
Description:
Enables or disables the front panel keypad.
Operation
Description
Description
Parameter:
Value
ENABle Unlock (enable) keypad
DISable Lock (disable keypad
Equivalent legacy command:
K0, K1
Equivalent key:
none
:SYSTem:RESet
Syntax:
:SYSTem:RESet
Description:
Resets the Digibridge configuration to turn-on
conditions.
Equivalent legacy command:
P2
Equivalent key:
[POWER]
:SYSTem:RESTart
Syntax:
:SYSTem:RESTart
Description:
Resets the Digibridge and re-runs power-on
diagnostics.
Equivalent legacy command:
P3
Equivalent key:
none
:SYSTem:CALibration
Syntax:
:SYSTem:CALibration {DISable|OPEN|SHORt}
Description:
Enables open or short zero calibration. The
:SYSTem:CALibration? query reads current status.
1693 RLC Digibridge
Description
85