Torque Flange Versions - HBM T10FS Operating Manual

10
1

Torque flange versions

In the case of option 2 "Electrical configuration", the T10FS torque flange
exists in versions KF1, SF1 and SU2. The difference between these versions
lies in the electrical inputs and outputs on the stator, the rotors are the same
for all the versions of a measuring range. Alternatively, versions SF1 and SU2
can be equipped with a magnetic or optical speed measuring system (in the
case of the optical system, with or without a reference pulse).
Type
Measurand
Energy supply
Output signal
Connection
cable
Can be
connected to
HBM
measurement
electronics
Fig. 1.1: T10FS versions
You can find out which version you have from the stator identification plate.
The version is specified in the "T10FS-..." number there.
Example: T10FS-001R- SU2-S-0-V1-Y
HBM
T10FS
KF1
Torque
Excitation voltage
54 V /14 kHz;
PP
square‐wave
Frequency
V1 ... V4
Excitation voltage
generator in HBM
electronics
SF1
Torque
Speed, magnetic or optical (option)
Speed and reference pulse, optical (option)
Supply voltage 18 V to 30 V DC
Frequency
V5, V6, W1, W2, W5, W6
Excitation voltage generator in the torque flange
(see also Page 66).
T10FS
SU2
Voltage
and
frequency
A0785-1.4 en