Fitting The Mounting Elements (Speed Measuring System) - HBM T10FS Operating Manual

T10FS
4.8 Fitting the mounting elements (speed measuring
system)
Three mounting elements with screws are included with the torque flange to
prevent the speed sensor being damaged during installation. The mounting
elements hold the rotor centrally in the antenna ring, making installation easier
and safer.
IMPORTANT
The mounting elements are only an aid to installation and must be
removed before the initial operation of the torque flange!
Fig. 4.8: Inserting the mounting elements
A0785-1.4 en
1
2
3
25
Mounting element
Fastening screw
HBM