Table of Contents
Advertisement
10
1
Torque flange versions
In the case of option 2 "electrical configuration", the T10FS torque flange exists
in versions KF1, SF1 and SU2. The difference between these versions lies in
the electrical inputs and outputs on the stator, the rotors are the same for all
the versions of a measuring range. Alternatively, versions SF1 and SU2 can be
equipped with a magnetic or optical speed measuring system (in the case of
the optical system, with or without a reference pulse).
Version
Measured
quantity
Power supply
Output signal
Connection
cable
Can be
connected to
HBM
measurement
electronics
Fig.1.1:
T10FS versions
You can find out which version you have from the stator identification plate.
The version is specified in the "T10FS ..." number there.
Example: T10FS 001R SU2 S 0 V1 Y (see also Page 63).
HBM
KF1
Torque
Excitation voltage
54 V
/14 kHz;
PP
square wave
Frequency
V1 ... V4
Excitation voltage
generator in HBM
electronics
T10FS
SF1
Torque
Speed, magnetic or optical (option)
Speed and reference pulse, optical (option)
Supply voltage 18 V to 30V DC
Frequency
V5, V6, W1, W2, W5, W6
Excitation voltage generator in the torque flange
T10FS
SU2
Frequency
and
voltage
A0785 14.0 en
Advertisement
Table of Contents
