Order Numbers, Accessories - HBM T10FS Operating Manual

66
11

Order numbers, accessories

Code Option 1: Measuring range
100Q 100 Nm
200Q 200 Nm
500Q 500 Nm
001R 1 kNm
002R 2 kNm
003R 3 kNm
005R 5 kNm
010R 10 kNm
Code Option 2: Nominal (rated) speed
L Nominal (rated) speed dependent on measuring
-1
range 8000 min
H Nominal (rated) speed dependent on measuring
-1
range 12000 min
Code Option 3: Electrical configuration
KF1
Output signal 10 kHz"5 kHz, excitation
voltage 14 kHz/54 V; square wave
SF1
Output signal 10 kHz"5 kHz,
supply voltage 18 ... 30 V DC
SU2
Output signal 10 kHz"5 kHz and "10 V,
supply voltage 18 ... 30 V DC
Code Option 4: Accuracy
S Standard
G Greater accuracy
Lin. <"0.03 % and TK
"
Order number:
K-T10FS
-
Ordering example:
5 0 0 Q
K-T10FS
-
Accessories, to be ordered separately
423G-7S, 7‐pin cable socket, straight cable entry, for torque output
(connectors 1, 3), Order No. 3-3101.0247
423W-7S, 7‐pin cable socket, 90  cable entry, for torque output
(connectors 1, 3), Order No.: 3-3312.0281
423G-8S, 8‐pin cable socket, straight cable entry, for speed output
(connector 2), Order No. 3-3312.0120
423W-8S, 8‐pin cable socket, 90  cable entry, for torque output
(connector 2), Order No.: 3-3312.0282
Kab8/00-2/2/2 by the meter , Order No. 4-3301.0071
HBM
-1
to 12000 min
-1
to 22000 min
1)
<"0.03 %
0
H S F 1
Code Option 5: Speed measuring system
0 No speed measuring system
1 With speed measuring system
A With speed measuring system and reference pulse
Code Option 6: Connection cable
V0 Without connection cable
V1 Torque connection cable for KF1, 423 free ends, 6m
*)
V2 Torque connection cable for KF1, 423 free ends, max. 80 m
V3 Torque connection cable for KF1, 423 MS3106PEMV, 6m
*)
V4 Torque connection cable for KF1, 423 MS3106PEMV, max. 80 m
V5 Torque connection cable for SF1/SU2, 423 D‐Sub 15P, 6m
*)
V6 Torque connection cable for SF1/SU2, 423 D‐Sub 15P, max. 50 m
W1 Torque and speed, one cable each, 423 D‐Sub 15P, 6m
*)
W2 Torque and speed, one cable each, 423 D‐Sub 15P, max. 50 m
W5 Torque and speed with reference pulse, one cable each,
423 free ends, 6 m
*)
W6 Torque and speed with reference pulse, one cable each,
423 free ends, max. 50 m
Code Option 7: Accessories
N No accessories
1)
For voltage output:
Lin. <"0.05 %; TK
2)
For option 3, code SF1, SU2 only
S 0 V 5 N
T10FS
2)
<"0.13 %
0
*) *)
m With selections V2,
V4, V6, W2 and W6,
please specify
*)
m
required length of
A0785-1.4 en