Mounting The Speed Flange (Speed Measuring System Only) - HBM T40FM Mounting Instructions

24
Fig 4.9: Construction example for plug clamps (for two plugs)
4.8 Mounting the speed flange (speed measuring
system only)
The speed disc (intermediate flange) is mounted at the factor on the rotor with
two screws (M4).
Fastening screws M4
Fig 4.10: Torque transducer with rotational speed measurement
HBM
T40FM
Speed disc
Sensor head for
measuring
rotational speed
A3276-3.0 en/de