Installation Options; Installation Without Dismantling The Antenna Ring (Without Speed Measuring System) - HBM T10FS Operating Manual

T10FS

4.3 Installation options

In principle, there are two possibilities for torque flange mounting: with the
antenna ring complete or dismantled. We recommend mounting as described
in Chapter 4.3.1. If installation in accordance with 4.3.1 is not possible (e.g. in
the case of subsequent stator replacement or mounting with a speed
measuring system), you will have to dismantle the antenna ring. It is essential
in this case to comply with the notes on assembling the antenna segments
(see "Mounting the stator" and
4.3.1 Installation without dismantling the antenna ring (without speed
measuring system)
1. Install rotor
3. Finish installation of shaft train
A0785-1.4 en
Mounting the slotted disc").
"
2. Install stator
4. Mount the clamp fixture where required
Customer
mounting
Support supplied by
customer
Clamp fixture
HBM
15