Setting Up The Computer; Usb On Windows - Braillo 650 SW2.1 User Manual

BRAILLO
l
3.

SETTING UP THE COMPUTER

Note! When connecting multiple Braillo printers with USB to the same computer, all printers MUST
have unique ID's configured.
See 'Printer ID:' on page
3.1

USB on Windows

Make sure the printer is powered on and connected to the Windows computer via an USB device
cable (Type A to Type B).
(Windows should automatically identify the printer and find the correct driver for it, but if it doesn't,
you need to manually add the printer and find the 'Generic Text only' printer driver.)
The printer then shows up as 'Generic / Text Only' like shown in the screen shot below:
57 for more information on how to set the printer ID.
B 650 SW2.1
27