Table of Contents
Advertisement
BRAILLO
l
To change a setting with just two alternatives.
If a setting can have just two alternatives, the display will look similar to this.
Active
button
Inactive
button, press to
activate, and then
press Accept
Select printer model
The printer model is always set correctly when the printer is shipped, but if for some reason the main
board has to be replaced, you have to select the correct printer model.
Note!
The settings set by the operator panel are the default values. However, when sending a text file from
the computer, some parameters for this specific job is sent along with the file. The parameters that
comes with the file will be active during the print job. When the job is finished, the settings will return
to the default settings again.
48
Accept or
Jump back to the
select button
previous menu
without saving
B 650 SW2.1
Advertisement
Table of Contents
