Operating The Sw2 Stacker - Braillo 650 SW2.1 User Manual

BRAILLO B 650 SW2.1
l

4.15 Operating the SW2 Stacker

Run belt Reset stacker Belt speed
- Run belt
Used to manually move the conveyor belt. Useful to move printed material out from the stacking unit.
- Reset stacker
When pushing this switch, the stacker control unit will start from the beginning of it's program and
cycle through the program once.
- Belt speed
The speed on the conveyor belt can be adjusted here. The conveyor belt speed will be directly propo-
tional to the distance between each pile of printed sheets.
66