Braillo 650 SW2.1 User Manual page 58

BRAILLO B 650 SW2.1
l
Sheet calibration:
Main Menu - Printer Setup - Sheet calibration
This is a function that makes it possible to make small adjustments
on the width of the sheet. There is a value that can be set from -10 to
+10. If the value is 0, there is no correction.
Negative numbers will give you a narrower sheet.
Positive numbers will give you a wider sheet.
Cutter calibration:
Main Menu - Printer Setup - Cutter calibration
This function adjusts the position of the cut related to the printed pag-
es. The paper sheet length stays the same.
The value can be set from -16 to +16.
Positive numbers gives a wider left and a narrower right margin on the
sheet. Negative numbers gives a narrower left and a wider right margin
on the sheet.
See "4.16 Cutter calibration" on page 67 for more information.
ASCII tables:
Main Menu - Printer setup - ASCII tables
An ASCII table is the same as a character set. When the printer receives
a character from the computer, it goes to an ASCII table to find out
which dot pattern is corresponding to this character.
This printer has a number of ASCII tables, and they are listed like
shown in the figure to the right. To select another table, use the up or
down arrow and press the green Accept button. Now this has become
the current table.
It is also possible to view the translation between characters and dots
in the different ASCII tables by pressing the "View" button.
Then a list like shown on the right will appear. Use the up and down
arrows to scroll the list.
GUI style/skin:
Main Menu - Printer setup - GUI style/skin
If any users of this printer has low vision and/or find it a bit difficult to
read the operator panel, it is possible to change the background and
text colours to get better contrast.
58