Table of Contents
Advertisement
BRAILLO
B 650 SW2.1
l
Printing in 4-page mode:
The number of pages sent to the Printer in 4-page mode, has to be a number that is possible to divide
by four. E.g. a document that contains 7 pages of text, must have one empty page added to get a total
of eight pages.
And those eight pages will fit on two sheets. (8 pages divided by 4 = 2 sheets).
Next, the text has to be sent to the Printer in the following sequence:
Page 1, 2, 7, 8, 3, 4, 5 and 6.
This formatting is normally done with computer software.
To be able to move the belt between each copy of a document, the Printer also needs a command
that will tell how many sheets the document contains. This command is an escape-sequence that
must be sent to the Printer in the beginning of the document. This is done by sending the ASCII value
no 27, then the letter P, and then the number of sheets.
E.g. in the example above, the command would look like this: escP02
(There are software on the market that will do this formatting automatic).
Here are some physical measurements to consider when adjusting the different settings :
Max paper height: 330 mm (13.0 inch)
(This is the same as the width of the paper roll).
Max paper length: 584 mm (23.0 inch)
Max no. of characters per. line: 44 char.
Margins are adjustable from 12.7 mm (0.5 inch) to 50.8 mm (2.0 inch) in 2.54 mm (0.1 inch) step.
45
Advertisement
Table of Contents
