Technical Specifications - Braillo 650 SW2.1 User Manual

Braille embosser
Table of Contents

Advertisement

BRAILLO
l
9.

TECHNICAL SPECIFICATIONS

9.1
Technical specifications
Format:
Paper roll:
Paper (roll) width:
Sheet width:
Line length:
Printing Mode:
Margins:
Page height:
Braille cell:
Line spacing:
Paper Weight:
Printing Speed:
Characters/sec.:
Pages/hour:
Electrical:
Voltage:
Current:
Power:
Fuse in printer:
Leakage current:
Compressed air:
Clean air without oil or water,
min. 7.0 bar @ 100 l/min., max. temperature 50° C.
Communication with the computer:
USB
Ethernet
WLAN
Environment:
Temperatures:
Rel. Humidity:
Measurements:
Height:
Width:
Length:
Weight:
130
Max. diameter 1100 mm (43 inches)
Inner core diameter min. 70 mm (2.75 inches), max. 84 mm (3.3 inches)
Min. 260 mm (10.2 inches), max. 330 mm (13 inches)
Min. 417 mm (16.4 inches), max. 585 mm (23 inches)
Min. 10, max. 44 characters
Single/Inter point
Inner/Outer min. 12.7, max. 50.8 mm (0.5 - 2 inches)
Max. 30 lines per page
Standard medium 6 dot
Fixed 5 mm
Min. 120 - max. 180 g/m², Recommended 150 g/m²
650 char/sec.
No. of pages per hour is dependent on page format
Single phase 230 V (+/- 10 %), 50/60 Hz
Approx. 4.3 A max.
Approx. 1000 W max.
10 AT
4.6 mA
15° - 30° C (60° - 86° F)
40 - 60 %
1420 mm
2590 mm
3340 mm
313 kilos
B 650 SW2.1

Advertisement

Table of Contents
loading

Table of Contents