Table of Contents
Advertisement
BRAILLO
l
3.7
Wireless network (WLAN)
The configuring of the wireless network connection is handled through a special configuration mode
where the printer creates a temporary Access Point. When connected to this AP the rest of the config-
uration is handled trough a standard web page.
To enter the WLAN configuration mode, navigate to:
Main Menu - Printer setup - Network configuration - Conf. WLAN.
See section '- Wireless configuration' on page 59 for more information.
A screen now shows up with the credentials needed to log on to the temporary configuration access
point. The network name (SSID) is unique for this printer, but the password is generated and will differ
every time you start configuration mode.
Leave the printer in this state while you continue the configuration.
Using a laptop, tablet, smart phone or other Wireless enabled unit with a web browser:
1. Connect to the temporary Access Point using the credentials in the printer display
2. Open a web browser and navigate to http://192.168.45.1/
Some devices will detect the need to 'sign-in' or 'authorization needed'. Clicking this notification
will lead you to the same web page.
3. In the 'Wireless network' drop-down menu, select the name of the wireless network to use
4. Enter the password in the 'Password' field
5. Click the 'Save network' button
B 650 SW2.1
35
Advertisement
Table of Contents
