Table of Contents
Advertisement
BRAILLO
NORWAY AS
●
2.5
Connecting the printer to the mains and computer.
The connections are inside the printer,
on the electric unit.
Connecting to the mains
See the fi gure below, this is a top view of the electrical unit.
Connect the enclosed mains power cable to the Mains inlet.
Note! If the plug on the mains power cable is to be replaced with one that is compatible with the local
electric contact points, observe that the yellow/green wire is the grounding (earthing) wire. Also make
sure that you are connecting to 230 volts!
THE PRINTER MUST ALWAYS BE CONNECTED TO GROUND!
Fans
Mains
outlet
Fan Fuse
3.15 AT
Enabled
Safety
Fan
Switches
Disabled
Outlet
inlet
1234567h
Mains
Mains
Hour
Inlet
Fuses
Counter
10 AT
1234567h
Main Switch
B 400 Series 3
Magnet Rack Fuses, 3.15 AT
Ext.
Conn.
A
B
C
D
Control
Control
Relay
Board
Voltage
Voltage
Fuse
Fuse
2.5 AF
2.5 AF
2.5 AF
2.5 AF
13
Advertisement
Table of Contents
