Table of Contents
Advertisement
BRAILLO
B 650 SW2.1
l
4.9
Printer setup menu
Main Menu - Printer setup
In this menu the basic settings regarding the printer is set.
Printer model:
Main Menu - Printer setup - Warning - Printer model
When entering this menu choice, a warning window will appear.
Braillo Norway has a number of different printer models that can use
the same electronics. But the different printer models have different
settings and different functions. This menu choice is where you
select the specific printer model. The software will then be adapted to
the printer in use.
This setting is fixed at the factory, and should under normal conditions
never need to be changed.
However, if for some reason the main board in the printer has been
replaced, you have to make sure that the correct printer model is
selected here.
Printer ID:
Main Menu - Printer setup - Printer ID
The printer has a function to make it possible to identify which printer
has printed a particular Braille book. It is done by sending a command
along with the Braille book that tells the printer to print it's
identification. On this setting you can set a 5 character code or name
that identifies this particular printer.
Also when more than one printer is connected with USB to the same
computer, the Printer ID MUST be set. This must be done to give the
connected printers unique ID's in the computer.
57
Advertisement
Table of Contents
