Table of Contents
Advertisement
BRAILLO
l
5.8
Magnet rack - cleaning
Remove the magnet rack as described in section 5.5 'Magnet rack - removal' on page
Then disassemble the magnet rack as described in section 5.6 'Magnet rack - disassembly, step by
step' on page
82.
Now use a damp cloth moistened with cleaning alcohol to wipe off the surfaces as described in the
figure below:
Note! Never oil, grease or lubricate any of the moving parts on a magnet rack!
This will only attract paper dust and cause clogging.
The support list
The iron pieces in
the long pivot arms
B 650 SW2.1
81.
Magnet poles on
the magnets
At the back of the long
pivot arms
87
Advertisement
Table of Contents
