Braillo 650 SW2.1 User Manual page 59

BRAILLO
l
Network configuration:
Main Menu - Printer setup - Network configuration
This menu choice gives you the possibility to choose between:
- Regular DHCP IP address (default setting)
- Static IP address
Note with static IP you have to set all the three network parameters
manually, and all three has to be set.
The three different settings for the static IP is set using the buttons as
shown in the figure to the right. Type the numbers into the first text
cell, then tap the next cell to move to it. When all four numbers are
set, press the green Accept button to go back to the Network configu-
ration menu.
- Wireless configuration
To start the set up for connecting to a WLAN network, press the button
'Conf. WLAN'.
Now the printer will start to transmit on a temporary WLAN network
with the SSID and password shown in the display.
Note that the password changes every time, so if you have to do this
more than once, remember to always use the latest password.
See 3.7 'Wireless network (WLAN)' on page
Backlight intensity:
Main Menu - Printer setup - Backlight intensity
Setting for the backlight intensity on the display.
Can be set from 15 to 100 %.
35 for more information.
B 650 SW2.1
59