Continuous Blending Action; Operation; Disassembling The Blender Jug - Gastroback DESIGN MIXER ADVANCED Operation Instructions Manual

3. Continuous blending action

The Kinetix Blade System ensures there are no spaces for food to get caught or trapped.
The extra wide blades are contoured to the base of the blender jug meaning food can never
jam or escape the high speed blades. There are no dead zones, so food is 100% blended
with no over or under blended ingredients.
Conventional Blades KINETIX Blade System

OPERATION

A

Disassembling the blender jug

1. Always turn the appliance off (all buttons are deactivated), wait until
the motor stops and unplug the appliance before assembling/disas-
sembling. Always completely assemble your appliance before you
put the plug into the power outlet.
B
2. Remove the blender jug from the motor base by grasping the
handle and lifting the jug in an upward direction.
3. Take the lid off the blender jug and empty the blender jug (pic-
ture A).
4. Take the clear refill lid and twist it anticlockwise to take it out.
NOTE: The refill lid has two small guiding pins that fit in the match-
ing gaps of the lid. Pull the inner lid up to remove it (picture B).
C
5. Remove the blade assembly housing by upturning the blender
jug and twisting the Blade Removal System clockwise to unlock
(picture C and D), then lift upwards and away from the base of the
blender jug.
ATTENTION: The circular plastic surround attached to the base of
the blender jug is not removable.
53