Gastroback DESIGN MIXER ADVANCED Operation Instructions Manual page 48

or refill lid. Never turn the appliance on without the blender jug properly placed on the
motorblock. Never place only the holder or the blade only on the motorblock. Never
touch the drive gear when the plug is connected to the power outlet.
• WARNING: If the blade is mounted in the blender jug, the blender jug is positioned on the
motorblock, and the plug is connected to the power outlet, do not insert your fingers, a wooden
or plastic spoon or similar cooking utensils or foreign substances in the blender jug. Always
take the blender jug off the motorblock before pushing the food down with a spoon.
WARNING:
• Never combine the blender jug and the holder without the blade. Without
the blade the bottom of the blender jug is open. Liquids could spill and might damage the
motorblock.
• Without the blender jug, the unit does not work.
• IMPORTANT: Ensure the blender jug is locked securely onto the motorblock
and that you can not knock the appliance over during operation. The
motor will not start before the plug is plugged into the power outlet, the
blender jug is securely locked onto the motorblock and the appliance is
switched ›On‹.
• As a safety feature, the unit automatically shuts off after operating for 2 minutes. If you want
to operate again, wait 1 minute and then continue.
WARNING:
• Do not overfill the blender jug. If necessary, take some food out of the
blender jug, using a wooden or plastic spoon, before starting the appliance again.
• Do not chop extremely hard food, such as nuts with shell or bones to avoid overrunning,
spurt out or that the motor stalls or stucks during operation because the blade is blocked.
WARNING:
• Do not operate the appliance when the blender jug has a crack or any
part of it is likely to be damaged. The appliance is likely to be damaged if the appliance was
subject to inadmissible strain (i.e. overheating, mechanical, or electric shock) or if there are
any cracks, excessively frayed parts, distortions or the motor stalls or stucks. In this case,
immediately unplug the appliance and return the entire appliance (including all parts and
accessories) to an authorised service centre for examination and repair.
WARNING:
• Do not fill ingredients into the blender jug which exceed a temperature of 60
degrees. After processing ice cubes slowly heat up the blender jug before processing hot
ingredients. Otherwise the blender jug will crack or get damaged. Use gloves processing hot
liquids and do not fill the blender jug up too high. Ensure not to burn yourself on the
blender jug, overrunning, spurt out or hot steam.
• Never place anything other than food and liquids in the blender whilst the motor is running.
WARNING:
• Do not place blender in the freezer with food or liquids. This will freeze
and damage the blade assembly housing, blender jug and motor.
• CAUTION: Do not place the appliance in an automatic dishwasher.
• ATTENTION: The circular plastic surround attached to the base of the blender jug in
not removable! Same with the plastic surround attached to the blades.
• Operate the appliance on a well accessible, stable, level, dry, and suitable large surface. Do
not place the appliance or any part of it on or near hot surfaces (heater, gas burner, grill, or
48