Movable And Sharp-Edged Parts - Risk Of Injury - Gastroback DESIGN MIXER ADVANCED Operation Instructions Manual

Hide thumbs Also See for DESIGN MIXER ADVANCED:
Table of Contents

Advertisement

Available languages

Available languages

oven). Do not place the appliance near the edge of the table or counter or on inclined
or wet surfaces or where it can fall. Keep the entire appliance away from direct sunlight
and sharp edges. Ensure the blender jug is locked securely onto the motorblock and that
you can not knock the appliance over during operation to avoid personal injury.
• Never leave the appliance unattended when the plug is connected to the power outlet.
Always immediately turn the appliance off, wait for the motor to stop completely, and
then unplug the appliance, if the appliance is not in use (even for a short break) and
before assembling, disassembling or cleaning. Never leave the appliance unattended
when in operational mode.
• Do not leave any food dry on the surfaces of the appliance. Do not immerse the motor
housing or power cord in water or any other liquid. Do not pour or drip any liquids on the
motor housing or power cord. When liquids are spilled on the motor housing, immediately
unplug the appliance and dry the motor housing to avoid risk of electric shock or fire. Do
not attempt to operate the appliance, when liquids are on or in the motor housing.
• Do not place the motorblock in an automatic dishwasher!
• To avoid damage, do not use any abrasive cleaners, corrosive chemicals (i.e.
disinfectants, bleach) or cleaning pads for operation or cleaning. Do not use any hard
or sharp utensils for operation or cleaning. Always handle the entire appliance and
all parts of it with care and without violence.
WARNING:
The blades are very sharp. Pay attention when handling the blades.
Only touch the blades on the blade assembly and handle with care when cleaning.
• Do not use the appliance if it is damaged or units of the appliance are damaged. Do
not use the appliance if it does not function properly or if it was excessively loaded.
The appliance is likely damaged if the appliance or units of the appliance show cracks,
exorbitant wearing down, alterations or leaks. It is also likely damaged if the drive wheel of the
motorblock moves slowly. Take the appliance for technical maintenance and repair to
an authorised specialised reparation shop.
WARNING:
Do not overfill the blender jug. If necessary, take some food out of
the blender jug, using a wooden or plastic spoon, before starting the appliance again.
• Do not chop extremely hard food, such as nuts with shell, bones to avoid overrunning, spurt
out or that the motor stalls or stucks during operation because the blade is blocked.
WARNING:
Do not fill ingredients into the blender jug which exceed a temperature of 60
degrees. After processing ice cubes slowly heat up the blender jug before processing hot
ingredients. Otherwise the blender jug will crack or get damaged. Use gloves processing
hot liquids and do not fill the blender jug up too high. Ensure not to burn yourself on the
blender jug, on overrunning, spurt out or hot steam. Touch the handle only for lifting the
blender jug.
• The appliance is for household use only.
Movable and sharp-edged parts – risk of injury
• Always turn the appliance off (all buttons are deactivated), wait for the motor to stop
moving and then pull the plug before taking the blender jug off the motorblock or taking off
49

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DESIGN MIXER ADVANCED and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

41000

Table of Contents