Huawei UPS5000-E-80K-LABBS User Manual page 221

UPS5000-E-(20 kVA-80 kVA)
User Manual (Integrated UPS, 208 V)
Alarm ID Alarm
(Alarm Name
ID-Cause
ID)
input
breaker
open
0338 PDC onput
breaker
open
0341 PDC
Maint.
breaker
closed
0342 Mains
input
breaker
open
0343 BPM input
breaker
open
0340 Maint.
breaker
closed
0345 Battery
breaker
open
0335 Generator
connected
0594-1 Insufficien
t redundant
racks
0095-1 Insuffi.
redundanc
Issue 04 (2020-03-12)
Severity System Action
Critical None.
Minor None.
Critical None.
Critical None.
Minor None.
Critical None.
Warning None.
Minor This alarm does
not trigger any
action.
Minor This alarm does
not trigger any
Copyright © Huawei Technologies Co., Ltd.
Cause Solution
the PDC is OFF. measures.
1. Check that all UPS
The output circuit
breaker on the
PDC is OFF.
2. On the LCD, check
The maintenance Running status
circuit breaker on displayed. No suggested
the PDC is ON. measures.
The mains input Running status
circuit breaker is displayed. No suggested
OFF. measures.
BPM input breaker Running status
open
displayed. No suggested
measures.
Maint. breaker Running status
closed displayed. No suggested
measures.
The battery circuit Running status
breaker is OFF. displayed. See details
about how to handle
other alarms.
Generator Running status
connected displayed. No suggested
measures.
1. Reduce the load.
 The load is
excessive. 2. Decrease the
 The configured
number of
redundant racks
is incorrect.
1. Reduce the load.
 The load is
excessive. 2. Decrease the
C Alarm List
output switches are
ON.
that PDC output
breaker open alarm
has disappeared. If
the alarm persists, tap
the Clear Fault
button to clear the
alarm.
configured number of
redundant racks.
213