Huawei UPS5000-E-80K-LABBS User Manual page 155

UPS5000-E-(20 kVA-80 kVA)
User Manual (Integrated UPS, 208 V)
Table 6-2 System configuration attributes and values
Item
Rated operating voltage
Rated frequency
Number of Phases LN1
Number of Phases LN2
Secondary load
Generator Usage
Power supply priority

Table 6-3 System configuration attributes and values
Item
Voltage Thresholds
Issue 04 (2020-03-12)
On the main menu screen, select device configuration and press
configuration screen, you can set thresholds for parameters.
The following table lists the system configuration attributes and values.
Volt Threshold Min
LN1
Volt Threshold Min
LN2
Volt Threshold Max
LN1
Copyright © Huawei Technologies Co., Ltd.
Value
208 V/120 V; 220 V/127 V;
230 V/132 V
50 Hz; 60 Hz
Single phase; three-phase
four-wire; three-phase
three-wire
Single phase; three-phase
four-wire; three-phase
three-wire
Not Used; Opening Only;
Opening And Closing
No Generator; Generator In
Use
Line 1-Switch I; Line
2-Switch II; No Line
Priority
Value
–30% to –5%
–30% to –5%
+5% to +30%
6 Operations
Description
The default value is 208
V/120 V. Set the parameter
based on site requirements.
The default value is 60 Hz.
Set the parameter based on
site requirements.
The default value is
three-phase four-wire. Set
the parameter based on site
requirements.
The default value is
three-phase four-wire. Set
the parameter based on site
requirements.
The default value is Not
Used. Set the parameter
based on site requirements.
The default value is No
generator. Set the parameter
based on site requirements.
The default value is Line
1-Switch I. Set the
parameter based on site
requirements.
. On the device
Description
The step increase is
± 1%. The default
settings are –10%
for LN1 and LN2.
Set the parameter
based on site
requirements.
The step increase is
± 1%. The default
147