UPS5000-E-(20 kVA-80 kVA)
User Manual (Integrated UPS, 208 V)
3.
Set IP address allocation to Automatic. IP address, Subnet mask, and Gateway are
assigned by the DHCP server (ECC).
4.
Issue 04 (2020-03-12)
Figure 6-4 Time screen
On the Network Param. screen, set IP address allocation, IP address, Subnet mask,
and Gateway.
Figure 6-5 Network Param. screen
After you set network parameters, connect the UPS to the network over a network cable, which enables
you to remotely manage the UPS. If you do not need remote management, retain the default network
parameter settings.
On the System Param. screen, select Single (default value) or Parallel. Set the voltage
level, output frequency, battery capacity, and the number of batteries.
Copyright © Huawei Technologies Co., Ltd.
6 Operations
151