Huawei UPS5000-E-80K-LABBS User Manual page 109

UPS5000-E-(20 kVA-80 kVA)
User Manual (Integrated UPS, 208 V)
Figure 5-33 Communication screen 2
Figure 5-34 Communication screen 3


Issue 04 (2020-03-12)
IP address allocation parameter
− If the MDU is directly connected to a computer over a network cable, the IP address
can only be allocated manually. The IP addresses of the MDU and computer must
be in the same network segment, and must be different.
− If the MDU is connected to a computer through a LAN switch or router with the
DHCP function, the IP address can be allocated manually or automatically.
 Manual: After the MDU connects to the PC over a network cable, check that
their IP addresses are two different values on the same network segment.
Automatic: The MDU automatically searches for available IP addresses in the

connected network. Ensure that the MDU and PC are on the same network
segment.
You can set IP address allocation to Manual or Automatic. After you restart the device, IP address
allocation changes back to Manual. IP address is the IP address that you have previously set.
IP address parameter
Copyright © Huawei Technologies Co., Ltd.
5 User Interface
101