REMKO Smart Control Touch Operating Manual page 18

REMKO Smart-Control Touch
"Settings" menu item (continued) - User
Level 2 menu item Level 3 menu item Level 4 menu item
Number of power tariffs
Graduated tariff Time field Tariff 1-9
Power tariff 1-9
Heat pump
Power tariff 1
PV current usage Feed-in tariff
Personal use tariff
Mode
Chimney sweep HW valve
Run-time in minutes
"Messages" menu item
This menu displays warnings, faults, operating sta-
tuses or messages.
If this "Messages" symbol should light up in red or
yellow in the basic display, it is necessary to check
what type of message is displayed in the message
level. In order to call up the message level, it is
only necessary to touch the symbol.
Possible messages can be found in the chapter
"Error messages on the Smart Control".
Differentiation is made here between numbers that
start with 6000, which are to be considered pure
operating messages and do not constitute a fault.
Numbers that start with 7000 are relevant faults,
which require the heat pump to be switched off.
Numbers that start with 8000 are warnings and
indicate that the heat pump must be checked!
18