HP StorageWorks Edge Switch 2/12 Installation Manual page 69

Figure 27: Zoning page—Modify Zone tab
5. Enter the new name in the Zone field and click Rename Zone. After the
6. Add or delete zone members as follows:
Edge Switch 2/12 Installation Guide
name is validated, the zone name is changed.
— Add member by attached node WWN - Select the WWN of an attached
device (node) from the Attached Node World Wide Name drop-down
list and click Add Member. The device is added to the zone.
— Add member by WWN - Enter the WWN of an attached device in the
World Wide Name field and click Add Member. The device is added to
the zone.
— Add member by domain ID and port number - Enter the domain ID
(1 through 31) of the switch in the Domain ID field, enter the switch port
number (0 through 11) to which a device is attached, and click Add
Member. The device attached to that port is added to the zone.
— Delete a member - To delete a zone member, click Delete next to the
configured zone member (WWN or domain ID and port number) at the
bottom of the page. A confirmation dialog box displays. Click OK to
delete the zone member.
Installing and Configuring the Edge Switch 2/12
69