HP StorageWorks Edge Switch 2/12 Installation Manual page 58

Installing and Configuring the Edge Switch 2/12
2. Click Activate to save the information. The following message box displays
Figure 20: Network configuration changes activated
3. Update the address resolution protocol (ARP) table for the browser PC.
4. At the PC, launch the browser application (Netscape Navigator or Internet
5. At the browser, enter the switch's new IP address as the Internet URL. The
6. Enter the user name and password.
58
c. At the Gateway Address field, enter the new value as specified by the
network administrator (default is 0.0.0.0).
(Figure 20).
a. Choose File > Close to close the EWS and browser applications. The
Windows desktop displays.
b. Choose Start > Programs > Accessories > Command Prompt. A disk
operating system (DOS) window displays.
c. Delete the switch's old IP address from the ARP table. At the command
(C:\) prompt, enter arp -d xxx.xxx.xxx.xxx. The
xxx.xxx.xxx.xxx is the old IP address for the switch.
d. Click close (X) at the upper right corner of the DOS window to close the
window or enter exit at the prompt to return to the Windows desktop.
Explorer).
Enter Network Password dialog box displays.
Edge Switch 2/12 Installation Guide