Lan-Connect The Switch - HP StorageWorks Edge Switch 2/12 Installation Manual

LAN-Connect the Switch

Connect the switch to the customer-supplied Ethernet LAN segment or the
Ethernet hub.
To connect the desktop or rack-mounted switch to the Ethernet LAN segment:
1. Connect one end of the Ethernet patch cable (supplied with the switch) to the
2. Connect the remaining end of the Ethernet cable to the LAN as follows:
3. To manage the switch through the EWS interface, attach the Ethernet LAN
Edge Switch 2/12 Installation Guide
RJ-45 connector (labeled 10/100) on the left front of the chassis.
— If the switch is installed on a customer-supplied LAN segment, connect
the cable to the LAN as directed by the network administrator.
— If the switch is installed on an Ethernet hub, connect the cable to any
available port on the hub.
segment to an web browser-capable computer and go to
Embedded Web Server" on page 46.
Installing and Configuring the Edge Switch 2/12
2
"Using the
45