8
HP KVM Server Console Switch User Guide
•
This kit might contain extra hardware for your convenience.
Required Items Not Included
•
•
Optional Items
Expansion Module ("Installing the Expansion Module" on page 23)
Required Tools
•
•
Rack Mounting the HP KVM Server Console Switch
Several rack mounting configurations include:
•
•
Firmware CD kit
PS/2 Interface Adapter or USB Interface Adapter
UTP CAT5 cable (CAT6 and CAT7 may be also used)
Phillips screwdriver
T-25 Torx driver
NOTE: Before installing the HP KVM Server Console Switch into the
rack, connect the HP KVM Server Console Switch to a power source,
using the power cords provided, and power on the unit. An activity
indicator light ("Components" on page 17) is displayed after a few
seconds. If the activity indicator light does not display, be sure that the
power is on, the power cord is connected, and the power source is valid.
Side-mount
−
Type A—Square- and round-hole rails
−
Type B—Square-hole rails
NOTE: The HP KVM Server Console Switch cannot be side-mounted
into a rack with round-hole rails.
Standard-mount