Aviat Networks ECLIPSE EDGE User Manual page 256

Chapter 3. Eclipse Edge Installation
CAUTION:
Ensure the cable connector assembly and the ODU connector
are completely dry before wrapping.
Wrapping Instructions for ODU Connector
Before commencing, remove the dust caps from the ODU RJ-45 connector and from
the ODU cable connector.
1. Cut two butyl tape strips about 5 mm wide and 150 mm long.
2. Mold the first strip between the connector and ODU body making sure to go
behind the dust cap post - between the dust cap ring/post and the ODU body. See
below.
This picture shows the first strip in place, moulded against the ODU body and
20 Aviat Networks