Software Reset; Clear Events And History - Aviat Networks ECLIPSE EDGE User Manual

Chapter 4. Eclipse Edge Configuration and Diagnostics

Software Reset

Software reset provides a hard reset for the software-resettable control module and
ODU.
A software reset is equivalent to a power-down reboot (power off - pause - power on),
with one important difference; a copy of the Helpdesk Data File is automatically
saved to a default folder on your Portal PC at C:\Program Files\Portal\Reset Logs\.
For information on this file refer to
A software reset should only be used where all other avenues for fault determination
are exhausted - effectively a last resort option. It can be likened to a reboot for a PC.
• Relevant Eclipse alarm descriptions include a reboot prompt where all other
recommended actions fail to produce a result.
• Eclipse alarm descriptions are prompted within:
• The Event Browser screen under Help for Event.
• The Alarms screen under Help for Alarm.
• The Commissioning and Troubleshooting chapter of this manual. Refer to
Alarms for Edge on page

Clear Events and History

This function is designed to clear all historical data from the Event Browser and
History screens. It is for use post-commissioning or after re-configuration or
remedial work to clean out unwanted, prior data.
Two recovery choices are presented in the event you decide to return to the original
entries:
• A recover option to fully recover from the cleared action. If not clicked, all prior data
is lost once you log off - there is no subsequent recovery option.
• A temporary recover option to recover (show) data just for the current Portal session.
When Clear is clicked:
• Both the Event Browser and History screens are updated to show only events/data
subsequent to the Clear command.
• Both Event Browser and History screens display an information line, which remains
for the current Portal session unless a full recover is actioned.
S
116
The Reports Screen on page
21.
32.
Portal
Aviat Networks