7.20 Event printer
7.20.1 Installation
Building Technologies
Fire Safety
This component is installed in exactly the same way as for the operating units
with the PMI & mainboard FCM2004 and the PMI & mainboard FCM2027.
The event printer FTO2001-A1 is an option and can be installed either in the
operating unit or in the operating add-on, depending on the station design.
Depending on the operating add-on, the printer can be installed either on the left or
on the right.
Figure 114: Installation of the printer in the operating unit
1
Event printer
2
Mounting space for the event printer
3
Guide for the fastening clamp
4
Fastening clamp (for both sides)
Prerequisite
Note that the serial RS232 module FCA2001-A1 is not included in the printer set
and has to be mounted unless it is already installed. Only one printer can be
connected per RS232 module.
Installing, exchanging and connecting modules
1
4
7
Event printer
2
3
195 | 248
A6V10210390_m_en_--
2018-08-29