Sensor Offsets Tab - Raven AutoBoom Calibration & Operation Manual

AutoBoom hydraulic valve. In this mode, the AutoBoom system will not adjust the boom height based upon the
ultrasonic sensor height.
Note:
PowerGlide Plus systems are locked to operate with gauge wheels, the system type cannot be
modified.
Additional Features
Center Rack Control. The center rack control feature allows the AutoBoom system to automatically adjust the
height of the center rack during field operations. Additional hardware may be required to provide automated
center rack control. Contact a local Raven dealer for more information or purchasing.
Disable Outer Sensors. (UltraGlide Systems) Allows the operator to disable outer boom sensors if the
implement is equipped with optional inner or mid sensor pairs. This feature is useful during operation with
the boom tips folded in to allow the AutoBoom system to be engaged and use only inner sensor pairs during
field operations.
XT Control. (UltraGlide Systems) Select this option if a control node capable of XT Control is installed to allow
the system to adjust for rough or challenging field terrain during applications.

Sensor Offsets Tab

Note:
The Sensor Offsets tab will not be used with PowerGlide Plus systems without the center rack
control feature.
Touch the Edit icon in the Machine Configuration panel to expand the panel.
1.
Locate and select the AutoBoom button.
2.
Touch the Sensor Offsets tab to display the height offset settings.
3.
Sensor Height Offset
The sensor height offset values adjust for the vertical distance from the spray tip to the sensor. Adjusting for
this distance allows the AutoBoom system to display the height of the spray tips and accurately control the
height of the boom to ensure an even spray pattern.
To set the sensor height offset for each sensor location:
Manual No. 016-0130-076 Rev. C
Edit
AutoBoom
Calibration
Sensor
Offsets
15