Setup Gui - System - The Preset Concept In Detail - junger V*AP Manual

V*AP
Setup GUI – SYSTEM - the preset concept in detail
The example above shows the preset concept of the V*AP. It is the central theme of the device.
For all relevant setting of the device one set of ON AIR parameters and a practically unlimited number of
PRESETS are available. The number depends on the memory space left.
If you want to load parameters from a preset to the ON AIR area or save parameters from the ON AIR area
to a preset, you must press <load> or <save> to open a dialog to select the desired preset :
In case of <save> you may edit the preset name. When you press <ok> the selected action will be executed.
To generate a new preset offline, you must click into the preset name field below the PRESET headline :
The pull down offers "Add Preset". If you click on that phrase a new entry to the list will be
generated. Clicking on the small cross will delete that preset.
You may change the default name afterwards or simply leave it as it is.
If you have selected the new preset or one of the existing presets indicated by the name displayed at the top,
you may edit the parameter values.
Important note! The presets of the V*AP are persistent by nature. You are working directly on the preset
memory, i.e. you need not worry about storing such presets. The V*AP does it for you.
In the bottom of the PRESET part you find the soft buttons to <copy> the content of that preset to the clip
board or to <paste> the content of the clip board into an other preset which you have selected before pasting.
You may also <export> or <import> the preset content to / from a file.
17