Intersecting Axis Gears - SaMASZ KDDR 861 Instruction Manual

A
7.3.

Intersecting axis gears

Everyday before starting work please check the oil level and, if needed, please refill after
having removed the vent A on the top of the gear (Fig. 39). The oil level can be checked through
check opening B on the side of the gear. Please refill the oil until it is visible in the check opening
B. The oil capacity: about 1 liter. Check oil level when the cutterbar is on the ground. Removing
the worked oil from the gearbox is done through the outlet C.
a)
To replace oil in gears:
Prepare an adequate tank for waste oil to be disposed of at a specialized plant,

Open refill vent B and drain vent A (Fig. 39),

Drain oils from the gear by opening drain vent C,

Close drain vent C,

Refill the oil level until it is visible in the check opening B,

Close refill vent A.

Oil capacities in intersecting axis gears
Tab. 6.
Model
All type
KDDR S/SL
Przekładnie:
052-02.0100AB.L
053-02.0100AB.L
Operator's manual
Fig. 38. Points of oil inspection and replacement in cutterbar
A
B
C
Fig. 39. Intersecting axis gears oil
Oil capacity
[l]
1
SAE 80W/90, API GL-4
2,5
Double-sided mower with central
B
b)
Oil type
After first 50 h of operation, then
after next 500 h (or at least once a
- 41 -
suspension
"REWERS"
A
B
C
Orrication frequency
year)