Intersecting Axis Gears - SaMASZ KDD 860 W Operator's Manual

7.2. Intersecting axis gears

Every day before starting work check the oil level and, if needed, refill after having removed
the vent A on the top of the gear (Fig. 49). The oil level can be checked through check opening B
on the side of the gear. Please refill the oil until it is visible in the check opening B. The oil
capacity: about 1 l (Fig. 49a, b) and about. 2.5 l (Fig. 49c). Check oil level when the cutterbar is on
the ground. Removing the old oil from the gearbox is done through the outlet C.
B
a)
Tab. 7. Oil capacities in intersecting axis gears
Model
All type
Gears
52-01.0100AB.L
53-01.0100AB.L
(mowers KDD 941 ST,
KDD 861 ST)
IMPORTANT:
The above instructions should be strictly followed. If the discs in
the cutterbar rotate loosely, do not worry about high intersecting axis gear
temperature; after long working time, it may reach as much as 100
Operator's manual
A
Fig. 48. Cutterbar oil inlet A
A
b)
Fig. 49. Intersecting axis gears oil
Oil capacity
[l]
1 SAE 80W/90, API GL-4
2.5 SAE 80W/90, API GL-4
Double-sided disc mowers
with central suspension
A
B
c)
Oil type
- 49 -
A
B
C
Lubrication frequency
Once every 3 seasons
(if working intensively more
frequently)
Once every 3 seasons
(if working intensively more
frequently)
o
C.