Intersecting Axis Gears - SaMASZ KDF 390 Operator's Manual

Front disc mower
Operator's manual
KDF 390
A
B
a b
Fig. 11. Cutterbar oil inlet (A) and outlet (B).
Tab.3. Oil capacities.
Model Oil capacity [L] Oil type Lubrication frequency
Once every 3 seasons
KDF 390 8,0
80W90
(if working intensively)
6.2. Intersecting axis gear.
Everyday before starting work please check the oil level and, if needed, please refill after having
removed the vent A on the top of the gear (Fig. 12.). The oil level can be checked through the check
opening B on the side of the gear. Please refill the oil until it is visible in the check opening B. The
oil capacity: about 1 l.
A
A
B
Fig. 12. Intersecting axis gears's lubrication points.
- 15 -