Technical Data And Accessories - Festo CPV -GE-DN2-8 Electronic Manual

A. Technical data and accessories
Load voltage for solenoid valves on CP valve terminal
Pin 2
Power supply connection
– Rated value
– Tolerance
Current consumption
– Rated value
– Tolerance
Residual ripple
Operating voltage for the bus interface
Micro Style connection: Pin 2
Open Style connection: Pin 5
Sub-D plug: Pin 9
– Rated value
– Tolerance
Electrical isolation
Electromagnetic compatibility
– Interference emitted
– Resistance to interference
*)
The CPV Direct can also be used with special authorization in residential areas (living, business
and commercial areas, small firms).
A-4
24 V DC (protection against incorrect polarity,
fused internally, switches on again automatically)
20.4...26.4 V
Sum of all switched-on CP solenoid valves; see
manual "CP pneumatics"
4 Vpp (within tolerance)
24 V DC (protected against incorrect polarity,
external fuse required)
11...30 V
Bus interface opto-decoupled
Tested as per EN 50081-2: (industry)
Tested as per EN 61000-6-2 (industry)
Information on pneumatics can be found in the "Pneumatics
manual, P.BE-CPV-.. ".
*)
Festo P.BE-CP-DN2-EN en 0107NH