Festo CPV -GE-DN2-8 Electronic Manual page 100

A. Technical data and accessories
Connection to the valve terminal
Angled plug – angled socket 0.5 m
Angled plug – angled socket 2 m
Angled plug – angled socket 5 m
Straight plug – angled socket 5 m
Straight plug – angled socket 8 m
Straight plug – straight socket 2 m can be used as drag chain
Straight plug – straight socket 5 m can be used as drag chain
Straight plug – straight socket 8 m can be used as drag chain
Plugs
Mains connector plug straight, PG9
Mains connector plug straight, PG13.5
Mains connector plug angled, PG9
Sensor plug straight, M12, PG7
A-6
If you wish to use 9-pin Sub-D plugs of other manufacturers,
you must replace the two flat screws on the plug by threaded
sockets (part no. 340 960).
Summary of CP connecting cables
The following CP connecting cables are available for extend-
ing the CPV Direct:
Summary of CP plugs for output module
Type Part no.
KVI-CP-1-WS-WD-0.5 178 564
KVI-CP-1-WS-WD-2 163 139
KVI-CP-1-WS-WD-5 161 138
KVI-CP-1-GS-WD-5 163 137
KVI-CP-1-GS-WD-8 163 136
KVI-CP-2-GS-GD-2 170 234
KVI-CP-2-GS-GD-5 170 235
KVI-CP-2-GS-GD-8 165 616
Type Part no.
NTSD-GD-9 18 493
NTSD-GD-13.5 18 526
NTSD-WD-9 18 527
SEA-GS-7 18 666
Festo P.BE-CP-DN2-EN en 0107NH