Festo CPV -GE-DN2-8 Electronic Manual page 75

2. Commissioning
Festo P.BE-CP-DN2-EN en 0107NH
Condition Counter for the valve function
The Condition Counter serves for the preventative mainten-
ance of wearing parts, necessary adjustments depending on
movement, etc.
There is a counter for each valve coil. The values are provided
in 32-bit format. You can compare the actual value automati-
cally with a specified nominal value.
The following table shows the elements of the 16 Condition
Counters:
Name
*)
"Condition Counter Value"
"Condition Counter Preselect"
"Reset Condition Counter Value"
"Condition Counter compare"
*)
Saved remanently in the CPV Direct
You can set or read out these parameters via the device para-
meters of your network configuration software.
(Coil)
Reset Cond. Counter Value
Cond. Counter Preselect
Fig. 2/11: Functioning method of the Condition Counter
The switching cycle counters count automatically the number
of valve actuations. With the parameter "Reset Condition
Counter Value", you can reset the counter value ("Condition
Counter Value") at any time. The reset parameter works
Format
unsigned double integer
*)
unsigned double integer
unsigned short integer
unsigned short integer
Condition Counter
Cond. Counter compare
Bit
Cond. Counter Value
U32 U32
2-23