Diagnosis Via User Program - Festo CPV -GE-DN2-8 Electronic Manual

3. Diagnosis

3.4.2 Diagnosis via user program

Festo P.BE-CP-DN2-EN en 0107NH
If the separate communication connection "Strobed I/O" is
configured for the CP system (see Fig. 2/7), the diagnostic
information from the above table (Fig. 3/5) is then available
for the user program. The data from the "Strobed I/O" con-
nection can be placed in the input file or in the M1 file of the
controller.
3-13