Festo CPV -GE-DN2-8 Electronic Manual page 67

2. Commissioning
Festo P.BE-CP-DN2-EN en 0107NH
Assigning the I/O addresses of the slave
With the registers "Output" and "Input" you can assign the
I/O addresses of the node to the PLC operands.
Fig. 2/7: Address assignment of the input of the 1-byte
diagnostic information ("Strobed")
The CPV Direct appears in the input data with two separate
communication connections:
– A "Strobed" connection for transmitting the diagnostic
information.
– A "Polled" or "Change of State" connection for transmit-
ting the physical input data.
2-15