Festo CPV -GE-DN2-8 Electronic Manual page 76

2. Commissioning
2-24
positively edge-orientated, only the change from "0" to the
value "1" leads to the resetting of the "Condition Counter
Value".
With the parameter "Condition Counter Preselect", you can
define a limit value for each counter. If this value is exceeded,
the parameter "Condition Counter compare" will be set. In
addition to the individual counter compare Status, all 16 com-
parison results are represented together in the parameter
"Counter preselect compare 1..16".
With the value "0" in the "Condition Counter Preselect" the
compare function is made inactive (standard setting).
Example
Fig. 2/12: Example for parametrizing the Condition Counter
with RSNetWorx
Festo P.BE-CP-DN2-EN en 0107NH