Festo CPV -GE-DN2-8 Electronic Manual page 49

1. Installation
Festo P.BE-CP-DN2-EN en 0107NH
You can connect the following CP modules to the CP exten-
sion connection:
– CP input module with 16 inputs, either with 8 x M12 plug
(sockets assigned twice), 16 x M8 plug (sockets assigned
once) or terminals (IP20).
– CP input module (IP20) with 16 inputs.
– CP output module with 8 outputs each with 0.5 A. The
power for the module is also supplied via the CP exten-
sion connection. The load voltage must be supplied
separately via an M18 plug.
– CPV valve terminals of widths 10, 14 and 18 mm. These
are available with 4, 6 or 8 CP valve plates.
– CPV valve terminals of widths 10 and 14 mm.
These are available for field bus connections with max. 8
double-solenoid or 16 single-solenoid valve plates.
Please note
The CPV Direct can be extended by maximum:
– one CP input module
– one CP valve terminal or one CP output module.
1-35