Festo CPV -GE-DN2-8 Electronic Manual page 97

A. Technical data and accessories
A.1 Technical specifications
General
Temperature range:
– Operation
– Storage/transport
Relative humidity
Protection class as per EN 60529 (plug con-
nector inserted or provided with protective cap)
Protection against electric shock
(protection against direct and indirect contact
as per EN 60204-1/IEC 204)
Protection against explosion
(as per EU guideline 94/9/EG, EN 50021 and
EN 50281-1-1). Do not disconnect electrical
connections which are under tension.
Valves
Operating voltage for logics
Pin 1
Power supply connection fused internally
– Rated value
– Tolerance
Current consumption
– Rated value
Residual ripple
Festo P.BE-CP-DN2-EN en 0107NH
- 5 ... + 50 °C
- 20 ... + 70 °C
95 %, non-condensing
– IP65 with Micro Style connection (2 x M12) or
Sub-D connection (with Festo plug)
– IP20 with Open Style connection
By means of PELV power units
(Protected Extra-Low Voltage)
II 3 G/D EEx nA II T5 - 5 °C ≤Ta ≤+ 50 °C
T 80 °C IP65 (year of manufacture see Ex-identifi-
cation on the product)
Plugs or adapters of the electric connections must
comply at least with protection class IP64.
See Pneumatics manual type P.BE-CPV-..
24 V DC (protection against incorrect polarity,
fused internally, switches on again automatically)
20.4...26.4 V
Max. 200 mA + current consumption of sensors
4 Vpp (within tolerance)
A-3