Festo CPV -GE-DN2-8 Electronic Manual page 50

1. Installation
1-36
Caution
The maximum cable length between the CPV Direct and the
last CP module must not exceed 10 m.
The CP connecting cables must have special electrical
characteristics. Always use, therefore, Festo CP connecting
cables.
You can obtain ready-to-use CP connecting cables from Festo.
These are available in various lengths and types. You will find
a summary in Appendix A.
Seal unused CP connections of your CP system with the rel-
evant seal provided. You will then comply with protection
class IP65.
The following diagram shows possible extensions:
Festo P.BE-CP-DN2-EN en 0107NH