Preparing The Product For Use - Otto Bock 4R153 Series Instructions For Use Manual

Item Quantity
Single-component pack, consisting of:
3
4
5
6
7
8
9

5 Preparing the product for use

CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
5.1 Installing the Adapter Plate
CAUTION
Using a wrong prosthetic socket
Contusions and pressure sores due to wrong socket fit
► Use the vacuum pump only in combination with a prosthetic socket
made with Harmony technology.
5.1.1 Preparing the Adapter Plate
A vacuum can be generated in the socket either via the proximal or the later­
al connector of the adapter plate.
INFORMATION
Using the proximal connector of the adapter plate is recommended only
when using a 5R2 lamination disc or the 6A94=3 TEC plate (with TPU
insert respectively). The lateral connector for the intake hose can be recog­
nised by the internal thread for the hose connector.
14
4R153* Adapter plate (see fig. 1)
Designation
1 PE solid rod (PE sinter filter)
1 TPU insert for 5R2 (thin)
TPU insert for TEC plate (thick)
1 Alternative connection for valve plate
1 O-ring
1 Locking screw
4 M6x38 mm screw
4 M6x35 mm screw
Reference number
4X305
–
–
–
–
–
–
–