4-3-3. Extension Drive Unit
S-AIT drive (CSMA-DR100S/CSMA-DR130F/CSMA-DR200S/CSMA-DR230F)
It enables installation of the maximum 12 units of the S-AIT drive units in the basic storage system and
the drive console.
1. Open the front door. (Refer to "4-2-1. Opening the Outer Cabinets".)
2. Install the add-on drive unit as follows.
(1) Remove the two screws (PWH4 x 8) and remove the blank panel (drive) in the way of disengag-
ing the claw portion.
n
Store the removed blank panels (drive) and two screws in a safe place so that they will not be lost.
No claw is provided on the blank panel (drive) in some cases.
4-112
PWH4 x 8
Blank panel (drive)
Claw
CSM-200